vats passkey system
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135769
Printed Date: May 23, 2024 at 12:10 PM
Topic: vats passkey system
Posted By: fiddlebick
Subject: vats passkey system
Date Posted: January 09, 2014 at 8:49 PM
2000 buick regal with the vats passkey. I am installing a bulldog remote (start only) unit. Model 500B, rushing headlong against the advice of the local stereo shop, and most of what I have read on the internet, however I have installed several of these for my personal use with no problems, at least while I owned the vehicles. Now I have the regal, an old work car that I am not really concerned about someone stealing, it is out here in the boonies, or in the security monitored parking lot at work most of the time. I have studied and researched this forum and youtube, and I think I am comfortable with disabling the passkey system forever, instead of using a relay or bypass module. Is it really as simple as soldering the correct resistor in the passkey wiring? I bought a mini relay, but I don't see a diagram for using it, but I know it functions the same as a larger relay....trying to make this install simple as possible. Please help soon, I want to begin install tomorrow..thanks guys!
-------------
fiddlebick
Replies:
Posted By: fiddlebick
Date Posted: January 10, 2014 at 1:10 PM
Never mind, I figured it out.
-------------
fiddlebick
|