Print Page | Close Window

python 594 and flcan in murano 07

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135900
Printed Date: October 31, 2024 at 6:14 PM


Topic: python 594 and flcan in murano 07

Posted By: uros
Subject: python 594 and flcan in murano 07
Date Posted: January 23, 2014 at 8:17 AM

Hi,

can anyone help me about installation.

I know to connect wires from Flcan to Python
but what do I do with other wires that are left
for alarm, do I connect it to car?
Wires alsso have different names so I m little
confused.
I f someone have install this or knows please help;)

Thank you



Replies:

Posted By: mustyk@att.net
Date Posted: January 26, 2014 at 7:08 AM
What are "The different Names" you speak of? More details will surely help.....

-------------
thetopinstaller




Posted By: uros
Date Posted: January 26, 2014 at 7:21 AM
Hi,

Car is 06 year ;)

I cant find security light wire, I dont have 40pin
connector on BCM like install guide is showing.

Wich wire goes where on ignition Harnes?

where goes 200ma status output,
starter output...

In my remote when remote start is press
it says Remote start is not available.
And there is no modul in drivers door for lock unlock
Regards




Posted By: uros
Date Posted: January 27, 2014 at 8:55 AM
Hi,

If some one would know please write answer.
first is remote start diagram and second may car
diagram.
I have connected as I best know, but does not work.
alsso flash logic flcan will do door lock/unlock-car has no alarm.....

I dont need to connect wires from alarm to my car if flcan has that function?

posted_image posted_image

Thank you





Print Page | Close Window