1999 honda civic door lock / trunk wires
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136214
Printed Date: May 15, 2024 at 4:09 PM
Topic: 1999 honda civic door lock / trunk wires
Posted By: Sungura222
Subject: 1999 honda civic door lock / trunk wires
Date Posted: March 03, 2014 at 8:28 PM
Dear All,
I am installing an alarm in my 1999 Honda Civic Saloon. I have the wiring diagram (Courtesy of the 12v.com), but I'm having problems identifying the door lock wires and the trunk wire.
I can't find the 'white keyless module' in the driver's kick panel. I have traced two wires on a green connector immediately above the fuse box (GRN/WHT-LOCK & GRN/ORNG - UNLOCK). However when testing these wires with a DMM, I'm not getting any voltage fluctuation upon pulsing the doors, it just stays at 0v. So I'm not sure if these are the correct wires, I'm I testing correctly?
Also confused with the trunk wire. I traced a BLUE/BLACK (-)wire at the trunk light. It should rest at +12v with trunk closed and 0v with trunk open. However, I can't get any reading on the DMM. Any thoughts/ advice on how to trace the correct wire for the trunk?
Any help will be appreciated, thank you.
-------------
(;-)
Replies:
Posted By: harryharris
Date Posted: March 04, 2014 at 6:07 AM
The reason being the 1999 civic saloon was built in the UK for the Euro Market and had a different lock system to the Japanese built 3 door and US built coupe. I've PM'd you.
-------------
Test before boxing up.
Posted By: Sungura222
Date Posted: March 05, 2014 at 1:55 AM
Thanks for the reply Harry.
Ok now that explains why I could not find the correct wires. I will have a look for the correct wires again tonight and PM you my findings.
Thanks
-------------
(;-)
|