Print Page | Close Window

switch to relay for 2011 corvette z06

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136504
Printed Date: April 29, 2024 at 4:23 AM


Topic: switch to relay for 2011 corvette z06

Posted By: 2ez24get
Subject: switch to relay for 2011 corvette z06
Date Posted: April 21, 2014 at 5:13 PM

I have a project to install a electronic throttle blipper on a 2011 Corvette Z06. I want to control the www.auto-blip.com clutch switch which is 5v trigger. I want to build a device to open a circuit when the switch is triggered then close the circuit. The switch is a on/off button switch on the shifter. I want to push the switch On and open/close the 5v circuit then push the switch again and have it open/close the circuit again.

Thanks.



Replies:

Posted By: oldspark
Date Posted: April 21, 2014 at 5:33 PM
Look at 555 timer circuits.





Print Page | Close Window