d2d on 05 f350 possible?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136802
Printed Date: May 29, 2024 at 6:23 PM
Topic: d2d on 05 f350 possible?
Posted By: ace_boy2099
Subject: d2d on 05 f350 possible?
Date Posted: June 14, 2014 at 4:52 PM
is it possible to do a data2data alarm/starter install on a 2005 Ford F350-Diesel so that it will control the door locks and triggers like the factory fob does or is this vehicle only wire2wire? If it is only wire2wire, how would i go about getting the alarm to communicate with the vehicle to read the door triggers instead of dome light supervision and have the aftermarket (compustar) control the factory RKE (and vice-versa) in order to retain functionality of the factory key fobs (free spare remotes... lol) and Drivers door keypad (convenience); without the interior switches controlling the a/s?
Replies:
Posted By: ace_boy2099
Date Posted: August 04, 2014 at 12:12 AM
I'll take the lack of response as a "No, It's Hardwire only"... Dang....
Posted By: oldspark
Date Posted: August 04, 2014 at 4:15 AM
Bingo. You'd need protocol translators etc etc. IOW, get a compatible system...
Other specialised forums may have solutions.
Posted By: howie ll
Date Posted: August 04, 2014 at 5:54 AM
No data solutions at all for that year and model, hardwire I'm afraid.
Quick rule of thumb for Fords manufactured in Europe, Australia or the US, if the ignition switch has thin gauge wires and the starter colour is blue/white then yes.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|