viper alarm 2 way problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136850
Printed Date: May 05, 2024 at 1:06 PM
Topic: viper alarm 2 way problem
Posted By: antonic
Subject: viper alarm 2 way problem
Date Posted: June 22, 2014 at 2:16 AM
Hi,
I have a Viper 5901 and everything function is working as it should.
Although every month or so, I would get a 2 way error where the brain does not confirming it's actions on the 2 way remote. The actions are done but the brain doesn't reply back to the remote as a 2 way should.
I would have to "reboot" the brain by disconnecting it from the battery then it'll work for another month or so.
Do I have a faulty brain?
Thanks,
Replies:
Posted By: freqsounds
Date Posted: July 22, 2014 at 8:48 PM
Nope, this is pretty typical of Viper products. The only thing I would recommend is deleting all remotes from the system and reprogram them. The instructions are in the installation manual for the Viper 5901.
-------------
No question is stupid or not worth asking. You were once a noob, right? :)
Posted By: antonic
Date Posted: July 22, 2014 at 8:55 PM
Thanks for the reply.
I'll try it and will update you guys.
|