alarm, 2007 hummer h2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136900
Printed Date: June 03, 2024 at 3:54 PM
Topic: alarm, 2007 hummer h2
Posted By: audiosecure
Subject: alarm, 2007 hummer h2
Date Posted: July 01, 2014 at 8:12 PM
hi guys i recently installed a viper 5904and a directed 1700g in to a 2007 h2 hummer, but for so reason its draining the battery.when i disconnect the directed 1700g the drain on the battery stops.can someone tell me what am i doing wrong?
Replies:
Posted By: howie ll
Date Posted: July 02, 2014 at 2:04 AM
No idea, maybe an ignition or ACC circuit or a relay permanently hot?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: catback
Date Posted: July 02, 2014 at 7:25 AM
Recheck your work/wiring, somethings odd if it's only the 1700g that makes the difference. Ensure no inputs are being activated full-time, also make sure the vehicle systems are shutting down and/or going idle like normal (RAP and others).
Posted By: audiosecure
Date Posted: July 02, 2014 at 6:43 PM
thanks for the input ,there is some about a the 1700g that i have to recheck a - blue input wire that comes in to quetion.
Posted By: howie ll
Date Posted: July 03, 2014 at 12:33 AM
Doesn't that blue connect to the status or GWR dark blue on H2?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|