viper 5204v 01 hyundai tiburon
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136995
Printed Date: April 30, 2024 at 10:13 AM
Topic: viper 5204v 01 hyundai tiburon
Posted By: rbates719
Subject: viper 5204v 01 hyundai tiburon
Date Posted: July 24, 2014 at 2:54 PM
If anyone can help me with the wiring I'd be very greatful. Viper 5204v 01 hyundai tiburon with manual transmission. Thanks
-------------
Hyundai
Replies:
Posted By: rbates719
Date Posted: July 24, 2014 at 2:56 PM
I don't care about remote start just want the alarm to work.
-------------
Hyundai
Posted By: howie ll
Date Posted: July 24, 2014 at 5:28 PM
You'll find the info in the vehicle wiring section. If you install it as an alarm only the pink in the H3 loom needs to be connected to IGN 1.
If you intend starter cut, cut the starter wire and join H3 green to the key side, H3 violet to the starter side. You need no other wires on H3.
H1 you will need black red white and brown, orange if you go for window close.
H2, Green for door triggers.
BROWN / black if you go for OEM horn.
RED / white for trunk release.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|