alpine 8026 in 1994 bronco

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137036
Printed Date: April 29, 2024 at 5:33 PM

Topic: alpine 8026 in 1994 bronco

Posted By: kr6.0
Subject: alpine 8026 in 1994 bronco
Date Posted: July 31, 2014 at 7:57 PM

Hey guys Ive got a 1994 Bronco (full size) that I am slowly working through. I had to rewire the power locks and they are not tied into the vehicle any longer. So the question is... I have a Alpine 8026 laying around from an old project that was never used and would love to have keyless entry. I searched the forums for the wiring diagram and found the one for an 8027 but is still cannot get power through the coil connections on my relay. Any help and or suggestions would be great. Thanks

Replies:

Posted By: interlock guy
Date Posted: August 06, 2014 at 3:17 PM

PerhapsI can help.

Can you send a rough sketch of how you are trying to wire the door locks and what two trigger wires you are trying to use on the output side of the security system. I assume you are using two SPDT Relays?

-------------
Interlock Guy

Print Page | Close Window