Print Page | Close Window

immobilizer diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137071
Printed Date: May 14, 2024 at 3:47 PM


Topic: immobilizer diagram

Posted By: pitbrade
Subject: immobilizer diagram
Date Posted: August 07, 2014 at 10:51 PM

Hi,
looking for immobilizer diagram ROCKWELL n: 04671346
Designed for JEEP and CHRYSLER in Europe
THANKS



Replies:

Posted By: howie ll
Date Posted: August 08, 2014 at 10:11 AM
Tell me what year and I'll tell you how to bypass it, I've done this before.
Is it the one with a small LED on the lower edge of the instrument panel?
If you're trying to remove it you'll have a number of black wires they should be:-
1 X 12V+
2 to ignition, in and out. Plus possibly a third ign. input.
2 to starter, in and out.
1 or 2 x ground (masse).

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: pitbrade
Date Posted: August 09, 2014 at 1:45 PM
Hi, thanks for you reply.
My Stratus immobilizer is the one with a small LED on the dashbord.
This is a Stratus 2.0 convertible from 1999 with a Rockwell immobilizer (only for european Chrysler, JEEP,....)
THANKS




Posted By: howie ll
Date Posted: August 09, 2014 at 4:20 PM
On the Jeeps that I did, late 90s it was behind the instrument cluster, just follow the wiring back from the LED.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: pitbrade
Date Posted: August 11, 2014 at 5:30 AM
THANKS a lot, i'm removing the dashboard and a german JEEP's owner
sent me the procedure to take the Rockwell immobilizer off.
I spent one mounth on the internet to collect informations for that (thanks again!). Professionnels from JEEP's or ex-CHRYSLER garages are unabble to remove this system, in fact, they are only competent for new vehicules.




Posted By: howie ll
Date Posted: August 11, 2014 at 6:51 AM
Nothing new there, spotty 20 year olds who can just about read the diagnostics

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.





Print Page | Close Window