fiat 500 2014 auto window closer
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137111
Printed Date: April 28, 2024 at 4:50 AM
Topic: fiat 500 2014 auto window closer
Posted By: ofer op
Subject: fiat 500 2014 auto window closer
Date Posted: August 15, 2014 at 4:01 PM
hi,
i installed today on the fiat 500 2014 an alarm unit. - all went good.
i wanted to put an Auto Power Window Closer Rollup Module as well...and i did.
all works fine.....but....
the windows go up only when i close the car threw the original remote controll.
when i press the close botton on the alarm i installed the car is locked - but the windows wont go up.
anyone furmilier with this issue?
thanks,
ofer
Replies:
Posted By: howie ll
Date Posted: August 16, 2014 at 2:39 AM
What make and model of alarm and what wire are you using to trigger the w/module?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: August 16, 2014 at 3:20 AM
Also have you tried testing?
I assume the window module has a NEG (-) trigger from the alarm?
Have you tried grounding this wire to test?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: ofer op
Date Posted: August 16, 2014 at 8:11 AM
i am using an alarm that you are probably not furmilier of.. its an "ranger" c54 alarm unit.
the window module is a universal "smart 2 window" module.
i am using the (+) turn signal as a trigger for the windows.
the vehicle is a fiat 500 2014, the basic model (leasing car)
i did not connected the window module dirrectly from the alarm, it is opperated as long as the turn signal is working and the acc is off.
Posted By: howie ll
Date Posted: August 16, 2014 at 8:21 AM
That's why it doesn't work from the alarm.
All alarms have a NEG (-) when armed, 1 wire goes to NEG (-) when yo arm the alarm. That wire should be the trigger for your window close, not the other method, then it will work with the alarm.
I always thought Clifford was the brand leader in Israel.
(We have to stick together).
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: ofer op
Date Posted: August 16, 2014 at 8:35 AM
i understand what your saying but i am installing everyday 5-8 cars with all kinds of accesories. many times i am installing an alarm + window module but now connecting them together! every time it works ok - this is the first time i couldnt opperate threw the original remote & the alarm remote.
i thought maybe there is a programming of some kind in the fiat 500.
p.s
if ill connect it as you sayd - it will work threw the alarm remote, but not threw the original remote. (i need it to work with both.)
thanks anyway
Posted By: howie ll
Date Posted: August 16, 2014 at 8:45 AM
Tell you what I'm sick of the UK and the the current political situation, I'll make Olim and come over to teach you!
Did it in the 73 war, maybe I can do it again!
There's away to run off the regular remote, probably using a timer relay, some closers, e.g. DEI product will fire on a latched or momentary output.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|