1994 camaro door locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137215
Printed Date: May 06, 2024 at 4:01 PM
Topic: 1994 camaro door locks
Posted By: bat9905
Subject: 1994 camaro door locks
Date Posted: September 07, 2014 at 1:02 AM
I have a friends 1994 camaro with factory keyless entry. We are installing a compustar pro cm4000 . door locks say reverse polarity on wiring and other topics indicate they are 5 wire reversal. When i use dmm and probe wires using passenger door lock switch they go to 12 volts. I wired relays to 5 wire reversal diagram and lock will work but unlock wont. am i missing something? Perhaps they are just positive door locks. im confused. Thanks for any help
-------------
bat9905
Replies:
Posted By: howie ll
Date Posted: September 07, 2014 at 6:04 AM
Does this help at all?:
Keyless versions: Use RED / black for lock and ORANGE / black for unlock. Both wires are located in the passengers kick panel at the keyless entry module. Do NOT use the orange power wire at the keyless module or door lock switch to power your door lock relays. The passenger switch is the master switch.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: bat9905
Date Posted: September 07, 2014 at 8:16 AM
Yes . Those are the wires I used . Maybe I just was tired . I'll look over it today . I might pull relays and start over .
-------------
bat9905
|