viper 5706v remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137224
Printed Date: April 29, 2024 at 6:37 AM
Topic: viper 5706v remote start
Posted By: jbru
Subject: viper 5706v remote start
Date Posted: September 08, 2014 at 10:14 PM
is there any step by step intruction that i can fallow for this install? im trying to install it in an 03 acura tl
-------------
James Bru
Replies:
Posted By: howie ll
Date Posted: September 09, 2014 at 1:42 AM
No. Made to be installed by pros hence the lack of paperwork.
From the way you asked your question you'd be strongly advised to save money and have it installed by pros.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: jbru
Date Posted: September 09, 2014 at 1:09 PM
i just see people do it on there own all the time. i just don't understand how the know exactly witch wire goes where
-------------
James Bru
Posted By: howie ll
Date Posted: September 09, 2014 at 1:17 PM
Which is why I'm suggesting a pro install.
Have you you made a start?
Have you looked for any info in the Vehicle Wiring section?
Many people here unless they have vehicle electrics knowledge, testing, soldering, etc will end up paying fortunes to have their mistakes rectified, "painting by numbers" just doesn't work here.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: smokeman1
Date Posted: September 09, 2014 at 6:37 PM
Howie is right, there is no paint by numbers for this stuff.
But here is some direction. Do your research. This is not a couple of hours job so plan on the entire weekend for this project. Test all of your wires before making any connections. The wiring guides are just guides, hence the need for testing.
Link to a wiring GUIDE:
https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx
https://www.readyremote.com/main.asp?action=select&yr=26080&product=Remote%20Start&make=Chevrolet&model=Cruze#
Go to the downloads section of this site, find the install manual for the Viper 571. It has a section on finding the wires you need. You need to use a DMM, (Digital Multi Meter) for finding these wires.
Solder your connections.
Heavy gauge harness: Red, RED / White, and RED / Black to you 12 volt constant. Also the Red from the H1 harness to 12v constant.
Orange to your accessory wire, Pink/White to your accessory 2 wire if it applies.
Pink to your ignition wire.
Violet to your starter wire.
What bypass are you using?
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: jbru
Date Posted: September 09, 2014 at 9:05 PM
i'm using a xpresskit pkball. this is all for an 03 acura tl. i know how to soder and all that. its just take the wiring digram that viper gave and use car wiring diagram
-------------
James Bru
Posted By: catback
Date Posted: September 10, 2014 at 1:20 AM
jbru]i wrote:
s just take the wiring digram that viper gave and use car wiring diagram
Yes? 
Not sure if that was a question.
Posted By: jbru
Date Posted: September 13, 2014 at 1:40 PM
how do i test the wires before making any connections? just tie them up and see if it works properly?
-------------
James Bru
Posted By: howie ll
Date Posted: September 13, 2014 at 1:45 PM
Use a DMM.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: smokeman1
Date Posted: September 13, 2014 at 7:26 PM
Read my above post on looking in the viper 571 install manual on finding the wires you need.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: jbru
Date Posted: September 13, 2014 at 11:06 PM
one more question would best buy be a bad place to take it to get installed?
i just not entirely sure if i want to do it myself yet
-------------
James Bru
Posted By: howie ll
Date Posted: September 14, 2014 at 3:33 AM
Up to you or Google Map your locality then type in auto security and ask questions such as
"Have you done my car?"
"Have you installed this equipment?"
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: catback
Date Posted: September 14, 2014 at 12:18 PM
Best Buy is an authorized Viper dealer/installer so yes Best Buy can do the installation.
|