viper 5704 on accent 2013 req

Hi guys.

I'm a little desperate since I bought a Viper 5704 car system alarm to install on my accent 2013, almost 2 years ago, unfortunately in my country (Peru) installers didn't know the brand and nobody want to install it. My original car alarm is not working anymore, it opens the door's locks while driving (past week I was with my 4 and 5 years old daugthers, when it suddently opened) ;S. I'm not using the car with my children.

If somebody has an install guide/wiring or tips about this specific combination: 5704-accent 2013 HB, with all alarm features enabled, preferably on spanish (I have to provide the manuals to installer) I will really apreciate.

I remember viper.com use to have some installation manuals, but you must be an Directs's Autorizated Installer to get access to it, if somebody has access to it, maybe can help please.

Thanks in advance guys!
God bless you.

PM me with your email address I'll send you the quick reference install guide in Spanish.
The English install guide is available in the Downloads/Manuals section at top of page.
I can also email you the vehicle specific for that year and model.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Here is a link to a Pictorial on the 2012 Accent ( 2013 should be the same ) :
https://www.the12volt.com/installbay/forum_posts.asp?tid=132310
It covers everything but the door & trunk triggers.

-------------
Soldering is fun!

Thanks for your help guys.

I'm trying to get all info preferably in spanish, in order to avoid any possible mistakes by installers.

If someone is registered on www.directechs.com, maybe can get access to it