put on seatbelt to start car
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137351
Printed Date: May 06, 2024 at 8:54 AM
Topic: put on seatbelt to start car
Posted By: dr drive
Subject: put on seatbelt to start car
Date Posted: September 30, 2014 at 1:11 PM
Hi, i want to put on the seatbelt to start the vehicle, but i don't want the wiring to interfere with the seatbelt lamp or airbag circuits. the vehicle is a Japanese Right hand drive Nissan almera (n16). it does not need to drive with the seatbelt on, just to start the vehicle. i am a newbie, i need a very basic breakdown.
-------------
Full 12
Replies:
Posted By: howie ll
Date Posted: September 30, 2014 at 4:20 PM
Do not interfere with any circuits concerning the seat belt, it will cause expensive problems and void any warranty.
PS AFAIK Almera was UK made.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: dr drive
Date Posted: October 01, 2014 at 10:51 AM
The thing is i already have a Japanese Nissan Tiida that is working like that, so i really wanted to get the other vehicles working the same way.
-------------
Full 12
|