door locks, two wire actuators

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137523
Printed Date: May 02, 2024 at 1:30 PM

Topic: door locks, two wire actuators

Posted By: 95f150
Subject: door locks, two wire actuators
Date Posted: October 24, 2014 at 7:46 PM

I have a 1995 f150 that im adding power door locks to. the door locks came out of a explorer so they are two wire locks. The f150 has no alarm system installed. So I need to know how to wire relays for the locks to work. Im using a 6 post momentum switch to lock and unlock the doors now so my install works perfect. Just need to know how to wire the relays. Thanks shawn.

Replies:

Posted By: catback
Date Posted: October 25, 2014 at 7:34 PM

Apply the diagram below to your existing setup.

posted_image

Posted By: 95f150
Date Posted: October 25, 2014 at 11:33 PM

now that's just what I needed, thanks a million. thanks shawn

Posted By: 95f150
Date Posted: October 26, 2014 at 12:34 PM

I tried that diagram and it will not work. Theres no place to hook the ground or it does not reverse it for lock/unlock. Any other ideas?

Posted By: catback
Date Posted: October 27, 2014 at 9:34 AM

So your system doesn't rest at ground? Do you have a schematic for your setup?

Personally, if the system doesn't rest at ground I would rewire the whole system to use only 2 relays but the 4-wire reversal will work in your system using 4 relays

https://www.the12volt.com/doorlocks/page3.asp#4w

Print Page | Close Window