2005 dodge caravan
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137535
Printed Date: May 05, 2024 at 4:42 AM
Topic: 2005 dodge caravan
Posted By: 36isherwood
Subject: 2005 dodge caravan
Date Posted: October 26, 2014 at 2:26 PM
I am installing a compustar 1way with a blade al on a 2005 dodge caravan I have never installed a remote starter in a dodge before and was wondering if I need to worry about the 2 starter wires or if the blade will accommodate all starting features
Replies:
Posted By: kreg357
Date Posted: October 26, 2014 at 2:56 PM
The Blade AL flashed with DL CH6 firmware will control the Starter2 MUX through data, no need to connect anything to the
Starter2 PURPLE / Brown wire. However, you still must connect the Compustar thick ignition output wires to the Caravan's
ignition wires at the main ignition switch harness ( Yellow = Starter and Pink/White = Ignition ). There is no Accessory
wire on this vehicle.
-------------
Soldering is fun!
|