viper 4806v wiring
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137659
Printed Date: April 29, 2024 at 11:21 AM
Topic: viper 4806v wiring
Posted By: mediaman
Subject: viper 4806v wiring
Date Posted: November 11, 2014 at 12:37 PM
HI, I saw the quick reference manual everywhere but I would appreciate if someone would help me with the complete installation manual for the Viper 4806V.
Also , here are wire connections not clear on the OMEGA OL-MDB-ALL Module-to VIPER 4806V
BLU/WTE-GWR (-)INPUT , BLK-GND , BLK/WTE-ACC.INPUT(+) , YEL/BLK-DOOR STATUS (-)OUTPUT , YEL/RED-TRUNK STATUS (-)OUTPUT , GRN/RED-E-BRAKE STATUS (-)OUTPUT AND GRY/RED-BRAKE (+)OUTPUT
VEHICLE IS 2009 CHEVY MALIBU LT
Thank You
-------------
1616884422
Replies:
Posted By: mediaman
Date Posted: November 15, 2014 at 1:39 PM
JUST NEED TO KNOW IF ACC+ SIGNAL FROM IGNITION SWITCH NEEDS TO CONNECT TO VIPER 4806V, BYPASS MODULE SHOWS THAT IT DOES.BUT,THEIR DRAWING SHOWS A GENERIC REMOTE STARTER.
THANK YOU.
-------------
1616884422
Posted By: mediaman
Date Posted: November 26, 2014 at 12:30 AM
I completed the installation , Thank You to all that helped.
-------------
1616884422
|