evo-one not programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137712
Printed Date: May 17, 2024 at 4:33 AM
Topic: evo-one not programming
Posted By: catalin capota
Subject: evo-one not programming
Date Posted: November 16, 2014 at 6:16 PM
Anyone installed one of these new Fortin by-passes? I have it all wired up as per the specific install instructions for a Nissan Sentra. All powers up but it will not go past step 5 for programming where the blue led should be flashing.
Anyone have any suggestions? I have gone through all my wiring and all is connected and soldered as per instructions.
Replies:
Posted By: metz35
Date Posted: November 16, 2014 at 7:17 PM
Make sure your hardware is compatible.
In the instructions it will say minimum hardware requirements.
Check module to see if it meets requirements
Posted By: catalin capota
Date Posted: November 17, 2014 at 9:16 PM
Turns out that the OBD connection was backwards as per supplied instructions. Programmed it to the car then had a hell of a time programming first tech remotes... spoke with four different tech support personnel and still not working... meh going back to Compustar that I know will work.
|