elantra 2013 canadian + dball2, 1 or 2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137727
Printed Date: May 11, 2024 at 2:30 AM
Topic: elantra 2013 canadian + dball2, 1 or 2
Posted By: xcessiv46
Subject: elantra 2013 canadian + dball2, 1 or 2
Date Posted: November 18, 2014 at 7:05 AM
Dear fellow DYIers,
I would like to install a remote starter on my dad's canadian version 2013 Elantra GL. Unfortunately, he only has 1 key.
I would use the Dball2 bypass module.
Do you know if I need 1 or 2 keys to program the bypass?
Thanks
Replies:
Posted By: sparkie
Date Posted: November 18, 2014 at 3:15 PM
Only 1 key is needed to program. When you make the connection for the immobilized wire you need to cut it. Connect the yellow wires to the connector side no matter what the manual says. DEI has listed it wrong. The wire is in the drivers kick panel. The rest of their instructions are correct though.
-------------
sparky
Posted By: xcessiv46
Date Posted: November 19, 2014 at 9:40 AM
sparkie wrote:
Only 1 key is needed to program. When you make the connection for the immobilized wire you need to cut it. Connect the yellow wires to the connector side no matter what the manual says. DEI has listed it wrong. The wire is in the drivers kick panel. The rest of their instructions are correct though.
Thanks! :)
|