excalibur alarm, 2000 dodge ram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137734
Printed Date: May 03, 2024 at 9:00 AM

Topic: excalibur alarm, 2000 dodge ram

Posted By: alarmguru
Subject: excalibur alarm, 2000 dodge ram
Date Posted: November 18, 2014 at 9:32 PM

I am working on a 2000 dodge ram and need to wire in the alarm door lock/unlock wires. I know this is a 5 wire reverse polarity system. It also has a factory keyless entry system that controls the locks and dome light supervision. The question is; how do I wire this up? Can I use the relays in the keyless entry module to work with the alarm, or do I have to wire in separate relays? Does anyone have a wire schematic for this? Any help would be appreciated. Thanks!

Replies:

Posted By: kreg357
Date Posted: November 19, 2014 at 6:17 AM

Here is the Bulldog Security method for the locks :
https://diagrams.marktoonen.nl/DOWNLOADS/14301_RAM-FULL-SIZE-PICKUP-_RAM%20FULL%20SIZE%203-5%20WIRE%20DOOR%20LOCKS%20JBS%20UNITS.pdf
The top diagram will work with Excalibur systems that output (-) lock signals.

You could use a DEI 451M module and wire it Type A for the Lock wire and Type C for the Unlock wire. Here is a link to that install guide :

https://www.the12volt.com/installbay/file.asp?ID=726

-------------
Soldering is fun!

Posted By: alarmguru
Date Posted: November 19, 2014 at 10:16 AM

Thank you for your help!

Posted By: alarmguru
Date Posted: November 24, 2014 at 5:34 PM

Has anyone had an issue with the starter interrupt relay buzzing during remote start only?

Print Page | Close Window