Print Page | Close Window

avital 4103 and xpresskit pkall

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137746
Printed Date: April 28, 2024 at 11:06 PM


Topic: avital 4103 and xpresskit pkall

Posted By: merc225
Subject: avital 4103 and xpresskit pkall
Date Posted: November 20, 2014 at 12:11 PM

I am planning on installing a Avital 4103 Remote Starter and Xpresskit PKALL Bypass on the following vehicle: 1999 Ford Explorer

----There is not an Alarm system on vehicle

Avital 4103 ---- Will I need use the Satellite Harness 4-pin connector?
What connections will I need to use on the 9-pin connector?

Xpresskit PKALL ---- Besides the D2D connector, what other connections need to be made?

Any help would be appreciated. Thanks.



Replies:

Posted By: ziggyb222
Date Posted: November 21, 2014 at 2:35 PM
In my experience using the data to data on the 4103 has proven to be unreliable for me. It only takes a little longer to connect wire to wire and solder and seal all your connections to make a trouble free install.. Just my thoughts!!!!


Print Page | Close Window