5806 + 455t in 98 jeep
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137748
Printed Date: April 28, 2024 at 5:47 PM
Topic: 5806 + 455t in 98 jeep
Posted By: saleen4971
Subject: 5806 + 455t in 98 jeep
Date Posted: November 20, 2014 at 5:01 PM
hey folks, i want to apologize in advance. i hate "noob posts" but i am beyond confused with this.
1998 grand cherokee, installing a viper 5806V with DEI 455T module.
the more i look at the viper wiring, the more confused i get with almost everything.
for example - viper has parking light output and parking light isolation wire which mentions a relay. what relay? are both of these needed?
500mA ground when armed output - huh?
there seems to only be one unlock output wire, where as the 455T has driver unlock and all unlock. in addition, the 455 has unlock/disarm and lock/arm, where as the arm/disarm and lock/unlock are seperate on the viper wiring?
ignition 2/flex output
2nd status/rear defogger output
status output
aux 1/3/4/ outputs
activation input
the 9 wires in the heavy remote start harness - there is a start input and output?
i hate to ask for a "step by step" because of how noobish that is, and how much of a PITA im sure it would be, but i cant help but ask for any and all help you kind folks can give me.
thanks in advance!
Replies:
Posted By: saleen4971
Date Posted: November 20, 2014 at 5:50 PM
i did find this, but do i really leave all of those wires disconnected?
https://www.the12volt.com/installbay/file.asp?ID=904
Posted By: saleen4971
Date Posted: November 20, 2014 at 6:29 PM
the manual states that it can have drivers priority unlock, but i dont see any "2nd unlock" wire?
|