Print Page | Close Window

5706v pager not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137815
Printed Date: October 31, 2024 at 6:39 PM


Topic: 5706v pager not working

Posted By: joeeey
Subject: 5706v pager not working
Date Posted: November 29, 2014 at 6:56 PM

I renectly installed a Viper 5706V everything works fine except the pager on the 2 way remote is not working. The icon is solid black so the remote pager is not disabled. the remote operates the vehicle but will not recieve commands from the module. But it did work when I first installed it and after programming it no longer works. I double checked every option in the programming and I do not see anything related to the pager? Any suggestions?

Thanks,
Joe.



Replies:

Posted By: joeeey
Date Posted: November 29, 2014 at 6:56 PM
installed in a 2002 Toyota 4Runner.




Posted By: joeeey
Date Posted: December 01, 2014 at 6:54 PM
FYI found the problem, the antenna wire was crimped and was effecting the paging signal coming from the 5706V module





Print Page | Close Window