viper 4706v
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137904
Printed Date: April 28, 2024 at 3:14 AM
Topic: viper 4706v
Posted By: jimd2p
Subject: viper 4706v
Date Posted: December 08, 2014 at 10:45 PM
Hello all. Haven't been on here in forever. I am installing a Viper remote start 4706v on my 2014 Ram 1500. I am using the idatalink bypass module. I am also adding a Directed 535t window controller, and will trigger the defroster on too.
I have a pretty good understanding of everything with the diagrams I have, and also have access to all vehicle diagrams at work. It looks like this unit has a wire already to trigger the defroster.
The truck has a module for each door window so it looks like my wiring will be a little more involved there. One question I have is that since this is not an alarm and I don't have the siren wire to trigger the windows up when arming, what wire on the remote start could I use so when I lock the doors it will trigger the windows to go up?
Any information you can give me before digging in to this would be most appreciated.
Jim
Replies:
Posted By: howie ll
Date Posted: December 09, 2014 at 3:54 AM
I*s there not an orange ground when locked wire?
If not use an aux, link to lock and time it for 10 secs. feed to the orange 535 inputs.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: December 09, 2014 at 3:56 AM
I just wasted two minutes of my life and went to the site, H2/6 orange.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: jimd2p
Date Posted: December 09, 2014 at 8:22 PM
Thanks for the help, though a bit snarky. Not something I do all the time, and when I was on here in the past I was always more than helpful with wiring diagrams and such. I'm an auto mechanic, not an installer so forgive my ignorance when it comes to some things. No need to be like that.
Posted By: howie ll
Date Posted: December 10, 2014 at 1:25 AM
Snarky?
No.
Attitude because you mentioned access to diagrams.
Did you read them?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: manbear1
Date Posted: February 28, 2015 at 9:24 PM
Is viper 4704v same as 4706v installation guide???
-------------
JAMES T WHEELER
Posted By: howie ll
Date Posted: March 01, 2015 at 3:08 AM
Yes
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: manbear1
Date Posted: March 01, 2015 at 1:03 PM
THANKS HowieII
-------------
JAMES T WHEELER
Posted By: howie ll
Date Posted: March 01, 2015 at 1:07 PM
Antenna, lead and remotes differ but wiring installation and operation are the same.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|