rear defogger
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137947
Printed Date: May 01, 2024 at 10:05 PM
Topic: rear defogger
Posted By: sportsfreaked
Subject: rear defogger
Date Posted: December 11, 2014 at 8:46 PM
I would like someone to check this for me please I think I have it correct. I am hooking up the rear defogger option on the Python 5303 I hooked up on the 2001 Intrepid. I need a relay and I should wire it like this:
30- 12v power fused
87- car defogger wire
85- remote start 200mA defogger wire
86- 12v power source fused
I know the Intrepid is a latched system. Do I have this correct? Thanks for the knowledge!!
Ed
-------------
As always thanks for the information and help! It's greatly appreciated
Replies:
Posted By: sportsfreaked
Date Posted: December 11, 2014 at 9:09 PM
I may have answered my own question. Since the rear defogger uses a relay do I really need a relay? Can't I just hook up to the rear defogger wire since it uses a neg trigger? I am sorry I have to think out loud. Thanks again.
Ed
-------------
As always thanks for the information and help! It's greatly appreciated
Posted By: tedmond
Date Posted: December 11, 2014 at 9:13 PM
looks good. not to standard pin layout but works the same.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|