viper vsm200 reactivation
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137953
Printed Date: May 02, 2024 at 9:57 AM
Topic: viper vsm200 reactivation
Posted By: pvcsilverado
Subject: viper vsm200 reactivation
Date Posted: December 12, 2014 at 5:55 PM
I have installed a viper vsm200 smartstart module about a year ago and let let the subcription expire and now I reactivated but I have no communication with the phone app!I guess I need an authorized installers to go on directed website and reactivate it for me.I just get the amber light blinking fast!Any installer that can help me with this ?? Thank you!
-------------
PVC
Replies:
Posted By: tedmond
Date Posted: December 13, 2014 at 6:09 AM
amber flash = connecting with satellite.
sometimes after updating an old smartstart account is done, it takes up to 24 hours for it to work. check again to see if the light is solid orange. if not unplug unit and wait 5min, replug unit back in.
post back with results.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: pvcsilverado
Date Posted: December 13, 2014 at 11:46 AM
No no luck!I tried what u told and still the same ,fast blinking amber light!any other suggestions?
-------------
PVC
Posted By: tedmond
Date Posted: December 13, 2014 at 9:01 PM
pm me your air id on the smartstart. i can remotely check the system status on the smartstart portal.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|