viper 4210v wiring
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137961
Printed Date: May 05, 2024 at 3:39 AM
Topic: viper 4210v wiring
Posted By: ourbudd
Subject: viper 4210v wiring
Date Posted: December 13, 2014 at 9:26 PM
I am looking for wiring info for a soon to be install of a Viper 4210V remote start, for a 2007 Dodge Caravan, it has the 3.3 engine and is a basic model. I think I have a descent idea but looking for any info that will help. One thing I want to different is to use the trunk open function to operate the open on a handicap van through a dry contact. You would almost think Viper doesn't want anybody to install on their own?
Thanks in advance, Tim
Replies:
Posted By: smokeman1
Date Posted: December 14, 2014 at 7:28 AM
https://www.readyremote.com/main.asp?action=select&yr=26080&product=Remote%20Start&make=Chevrolet&model=Cruze#
https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx
https://www.commandocaralarms.com/wiringsearch.asp
Listings above are to sites for wire info. They are a guide and may not match to your vehicle. Use a DMM to test and verify all wires before making your connections.
Also do a search on this site for your make/model of vehicle. Usually there is some other info about remote start installs.
Viper/DEI units are not made to be DIY install, so there is no support from them to you.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
|