evo all viper 5706v
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138166
Printed Date: May 10, 2024 at 7:58 AM
Topic: evo all viper 5706v
Posted By: thewirefather
Subject: evo all viper 5706v
Date Posted: January 06, 2015 at 5:41 PM
Hello all this is my first post on this site and I am still not sure if I am posting it in the correct spot but here goes. My vehicle is a 2013 Ram 1500, I just wired everything up (W2W) and everything is working perfectly. My question is how exactly do I make my viper control the window up/down capabilities? I have read that I may need some sort of module? but I also read that if you have one touch window up/down from factory on vehicle then you just have to wire it?
So my questions are:
1.Can I just wire my Evo all sliding door left/right to my viper aux 1?
2.Can I do do this without buying another module?
3. Just for fun and to catch me up with D2D what would need to be connected for D2D to work with my viper ? Is it just the d2d cable and the pink ignition and thats it?
Replies:
Posted By: tedmond
Date Posted: January 06, 2015 at 6:30 PM
1. no the sliding door is just for sliding door on certain vehicles.
2. you need a directed 535T window module
3. you simply need the d2d cable from the viper to the fortin piece, then basic connections from the evo all to the vehicle.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: thewirefather
Date Posted: January 06, 2015 at 6:46 PM
Thanks for the fast reply!
I just have a few more questions
1. How exactly do I wire the 535t module to make it work with vipers aux 1?
2. Is it possible to buy and use a 5906v remote instead of the one that came with the 5706v?
Thanks again in advance
Posted By: tedmond
Date Posted: January 06, 2015 at 10:07 PM
the 535T will need to be wires to the window motor leg wires, which will be either in your kick panel OR the door panel.
Yes you can just purchase the 5906 remote and program that to the 5706.
Just a question, did you end up having an issue with programming your remotes, and needed a bitwriter in the richmond hill area? I helped someone with a truck with the same system/asked same questions last week.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: thewirefather
Date Posted: January 06, 2015 at 10:15 PM
Yes that was me haha sorry for all the questions and once again thanks for all your help!
Posted By: tedmond
Date Posted: January 06, 2015 at 11:39 PM
no problem, if you have other questions feel free to PM.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|