Print Page | Close Window

bypass immobilizer stopped working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138222
Printed Date: June 01, 2024 at 2:16 AM


Topic: bypass immobilizer stopped working

Posted By: durf23112
Subject: bypass immobilizer stopped working
Date Posted: January 11, 2015 at 4:34 PM

viper remote 5301 in place and working . Installed iDatalink ADS-ALCA. programmed Bypass all was well. Wife's car. Worked fine for a week then won';t start. remote start works. IF put key in ignition remote start will start car. reset Bypass mulitple times still just cranks without starting. Help? What changed, am I missing something?



-------------
jf durf



Replies:

Posted By: chev104275
Date Posted: January 11, 2015 at 5:22 PM
Have you checked your connections ? Was everything soldered at time of install ?

I have yet to have a idata piece go bad

-------------
If i Can't Install it    I Don't need it   Joe


Print Page | Close Window