how to program avital 3300l
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138233
Printed Date: May 11, 2024 at 6:16 AM
Topic: how to program avital 3300l
Posted By: oborowsk
Subject: how to program avital 3300l
Date Posted: January 12, 2015 at 6:54 PM
Hi, just installed new Avital 3300L in my 86 Chevy C10 pickup and everything works great. Want to change a few setting using a SAA998T programmer I just bought (version 1.5). Plugged everything in but no communication with alarm system. Any special procedure to get this working? If I try to read from the system, communication fails.
I also just ordered the upgrade kit for the SAA998T to make it version 2.9 but the Avital manual tells me that I need at least version 1.4 (which I have). Any hints or recommendations appreciated.
Thanks
-------------
Olaf
Replies:
Posted By: tedmond
Date Posted: January 12, 2015 at 10:01 PM
make sure the system is disarmed/unlocked.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: oborowsk
Date Posted: January 14, 2015 at 12:02 AM
Just went through the install guide again and it doesn't mention or show any Bitwriter capability. Went on the Avital WEB-site and it clearly states that it is supported (3300L). Looking at the connector diagram, there is not even a connector for serial interface. Is Avital advertising something they can't really do? Anyone any experience in installing 3300L systems? Ran into the same issue?
Contacted Avital Tech Support via email to see what they have to say.
-------------
Olaf
|