Print Page | Close Window

key in box bypass wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138271
Printed Date: May 15, 2024 at 10:12 AM


Topic: key in box bypass wiring

Posted By: jnz1
Subject: key in box bypass wiring
Date Posted: January 16, 2015 at 6:32 PM

I have a what looks to be replica 556 bypass on a 2003 Ford Escape and it has two wires to be connected a ywllow/green and a whit/green. Would anyone be able to help as to where these wire up to?



Replies:

Posted By: tedmond
Date Posted: January 16, 2015 at 7:41 PM
i wouldnt use the KIB for this vehicle, look at the PKALL or fortin key-override-all

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert



Posted By: jnz1
Date Posted: January 16, 2015 at 11:02 PM
I was actually just upgrading the system. It had a basic rs from advanced auto and I wanted a little more distance. The kib worked prior just didn't remember what the two wires were hooked to.



Posted By: jnz1
Date Posted: January 17, 2015 at 2:07 AM
Just wanted to share for anyone that gets them selves a replica 556 bypass. For transponder use the YELLOW /GREEN goes to 12v+ and the WHITE/ green to the status output.


Print Page | Close Window