cm3000

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138279
Printed Date: May 16, 2024 at 2:59 AM

Topic: cm3000

Posted By: tmkf_patryk
Subject: cm3000
Date Posted: January 17, 2015 at 11:01 AM

Hello,

I have been installing DEI remote starters for a while, friend asked to swap over a cm3000 and i have it in my hands, and have a few questions.

first off, the 2nd acc/ign/start. I assume theres a relay made where I just straight connect one of these wires to the corresponding alt/ign/start wire on the car?

second question, I have the starter-kill output wire here, and normally I never use it on the DEI but I came across this post:
https://www.the12volt.com/installbay/forum_posts.asp?tid=126899
does it need to be wired up? (plan to leave it off and see if the ignition cranks too long with it)

thanks in advance

Replies:

Posted By: tmkf_patryk
Date Posted: January 17, 2015 at 6:19 PM

well, finished the car, it didnt require any 2nd acc/ign/start connections

also i didnt use the anti grind/starter kill as it seemed to work great without that hooked up.

I guess I would manually wire a seperate relay for the 2nd functions, unless anyone knows for the future how does it work for a compustar brain like the cm3000.

Posted By: tedmond
Date Posted: January 17, 2015 at 8:31 PM

all the new compustar units FT7X00 has 3 programmable outputs for ign acc or start.

compustar alarm start brains that you have, al include the relay for anti grind. Its prewired up to the latest 7x00 generation. Not necessary to use, but the antigrind feature is nice.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert