Print Page | Close Window

2002 trailblazer remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138314
Printed Date: April 27, 2024 at 12:22 PM


Topic: 2002 trailblazer remote starter

Posted By: derekh1979
Subject: 2002 trailblazer remote starter
Date Posted: January 21, 2015 at 10:49 AM

Hello All,

I am going to attempt to install a remote starter/alarm/keyless entry system... I have heard so many different options for the locks and passlock2 bypass... DEI Etc... Whats the easiest single bypass that will do locks passlockII starter the whole thing for a 2002 trailblazer?

Thanks for all your help guys.... and girls...

Thanks,
Derek



Replies:

Posted By: chev104275
Date Posted: January 21, 2015 at 11:29 AM
I use only idatalink stuff very good combo bypasses. Go to idatalink.com and put your vehicle info then download the guide so you can look it over. Where ever you buy from make sure it's flashed with the firmware you need.

-------------
If i Can't Install it    I Don't need it   Joe




Posted By: kreg357
Date Posted: January 21, 2015 at 12:04 PM

I'm with Chev, iDatalink modules can't be beat.  That being said, obtaining the right module, flashed with the correct firmware can be a challenge for the DIY'er.

Here is a link to a Pictorial on your vehicle  : https://www.the12volt.com/installbay/forum_posts.asp?tid=130514

The Fortin INT-SL+ bypass module used in the Pictorial is a very solid piece and best of all comes pre-loaded with firmware.  Here is a link to the Fortin INT-SL+ info :  https://fortin.ca/en/products/flash-series/int-sl%2B/



-------------
Soldering is fun!





Print Page | Close Window