2009 mazda6 remote start wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138320
Printed Date: April 28, 2024 at 6:26 AM

Topic: 2009 mazda6 remote start wiring

Posted By: skeetr
Subject: 2009 mazda6 remote start wiring
Date Posted: January 22, 2015 at 12:38 PM

I have put together a list of all the wiring I think I know.
I would really appreciate a second look to see if I messed anything up.
I have a couple wires that I don't know where they should be connected.

Thanks in advance for your help!
posted_image

Replies:

Posted By: skeetr
Date Posted: January 22, 2015 at 2:58 PM

OK, Figured out this much:
Neutral Safety needs to be ground with E-brake set
Still in search of information on:
How to connect the parking lights?
What is the WHITE/ Blue Activation Input used for and where to connect?
What is the Violet (+)Door Input used for and where to connect?
Is it fine to use the Violet / YELLOW (-) Starter Output for the Clutch Bypass? (Mine should be negative)I will not be using a bypass relay, I will connect at the BLACK / YELLOW wire at the clutch pedal.

Print Page | Close Window