Print Page | Close Window

adding shock sensor to autopage

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138384
Printed Date: April 30, 2024 at 2:19 AM


Topic: adding shock sensor to autopage

Posted By: rolex121
Subject: adding shock sensor to autopage
Date Posted: January 31, 2015 at 1:14 PM

Is there a way to add a shock sensor to Autopage rs625, if yes where do I connect those 4 wires of the sensor?



Replies:

Posted By: tedmond
Date Posted: January 31, 2015 at 8:44 PM
your unit is strictly a remote start, adding a shock sensor is not possible. I have yet to see an autopage have a build in passive alarm (monitor doors/trunk/hood) Cant be done

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert



Posted By: howie ll
Date Posted: February 01, 2015 at 3:23 AM
And even if you could, if supposing there was a door trigger, the shock sensor would go off during the remote start.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.


Print Page | Close Window