2014 Nissan Juke and Evo All
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138534
Printed Date: April 28, 2024 at 8:56 PM
Topic: 2014 Nissan Juke and Evo All
Posted By: mpe235
Subject: 2014 Nissan Juke and Evo All
Date Posted: February 21, 2015 at 7:05 AM
I am going to be installing a remote start in a PTS 2014 Nissan Juke and have one question about the connection at the pts switch. According to the picture in the install manual it looks like I have to make connections at pin 4 and 8. Can someone confirm this? Or is it pin 4 or 8 depending on the meter reading that voltage drops when the button is pressed?
https://fortin.ca/download/24021/standalone_evo-all_thar-nis1_(t-harness)_nissan_infiniti_without_keyport.rev-20141113.pdf
-------------
Nissan Master Tech.
Replies:
Posted By: tedmond
Date Posted: February 21, 2015 at 7:25 AM
pin 4 or 8. if you read the manual its a chart, indicating your vehicle uses light green pin 8
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: mpe235
Date Posted: February 21, 2015 at 7:38 AM
Thanks for the info.
-------------
Nissan Master Tech.
|