05 Durango, Viper 4105v and DB-ALL2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138546
Printed Date: May 05, 2024 at 9:44 PM
Topic: 05 Durango, Viper 4105v and DB-ALL2
Posted By: adkinsc
Subject: 05 Durango, Viper 4105v and DB-ALL2
Date Posted: February 22, 2015 at 12:30 PM
I have a Viper 4105 and DB-ALL2 coming. I've been reading up before they get here. I have a question about the door locks. The instructions I've found say to use a -pulse and diodes with 2 relays. Is it possible to use the factory door lock relays? Also I'm not positive whether or not I have the sentry key anti theft feature. The durango came with two keys that have the lock/unlock and panic buttons, one of which must not be programed because it doesn't function. I removed the ic board from inside the fob and the key still started and allowed it to run so I'm thinking there isn't any anti theft. Any other heads up would be appreciated if anyone has anything I should look out for. Thanks in advance
Replies:
Posted By: tedmond
Date Posted: February 22, 2015 at 8:23 PM
if you were hardwiring your locks, you would need 2 relays, resistors and a negative trigger from the remote start.
HOWEVER- you are using a convenience module (DBALL2) + built in immobilizer bypass. No need for relays as its controlled by the vehicles network.
You will require one additional relay for the second acc wire. Other than that very basic/easy install.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: adkinsc
Date Posted: February 23, 2015 at 5:26 AM
Oh, ok. I ran across a couple threads about installs on other vehicles and reading the dball instructions that kind of made me think that but I still wasn't sure. Man, technology has came a long way since the last install I did. Thanks for the clarification Ted.
|