95 ranger without power door locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138568
Printed Date: April 29, 2024 at 4:23 AM
Topic: 95 ranger without power door locks
Posted By: shiner1
Subject: 95 ranger without power door locks
Date Posted: February 26, 2015 at 1:08 PM
Any help on installing power door locks on 95ranger but it does not have them at all
-------------
shiner1
Replies:
Posted By: shark mobile
Date Posted: February 26, 2015 at 5:38 PM
You need to install door lock actuators which is relatively simple...with that said you would then require a means to open the door remotely which there is several brands of door lock kits out there or you could put a remote start in it...the process is pretty simple and most shops will do this kind of stuff for a few hundred bucks installed with equipment. (Two front doors for that price :)
-------------
Solder, tape, repeat!
Posted By: howie ll
Date Posted: February 27, 2015 at 9:17 AM
Buy a complete kit from SPAL including an internal switch (optional).
It will have the special (timer) relay wiring and wiring instructions.
They also do them as a keyless entry (remote control) option.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: February 27, 2015 at 9:31 AM
This from Amazon, note, I haven't a clue as to its quality:-
https://www.amazon.com/Universal-Central-Unlock-Conversion-actuators/dp/B0033YECEK/ref=pd_sbs_auto_1?ie=UTF8&refRID=15NKPVMPTGBCVNHHSN2Q
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|