2007 ford fusion
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138571
Printed Date: May 05, 2024 at 5:23 PM
Topic: 2007 ford fusion
Posted By: ricardoboston
Subject: 2007 ford fusion
Date Posted: February 26, 2015 at 6:02 PM
hi i recently have a remote start installed an 2007 ford fusion and the remote starter works great but this car has digital heat and ac the thing is when the car start with the remote start the heat won't work even if he start the car with the key won't work either unless you turn it on manually so anyone knows what i should do to try to help him or it its normal ? cause the guy always has to go to the car in the morning to turn the heat on manually ,thanks
Replies:
Posted By: tedmond
Date Posted: February 26, 2015 at 6:55 PM
Holy run on sentence. Might want to use some punctuation there...
Two possible fixes:
1) Follow TSB 09-20-1
Replace EATC Module to:
8E5Z-19980-A EATC Climate Control Module - Less Heated Seats
8E5Z-19980-B EATC Climate Control Module - With Heated Seats
2) Wire a relay to trigger the dash switch, use a pulse after start depending on your unit.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: howie ll
Date Posted: February 27, 2015 at 6:40 AM
Trypoweringupalloftheignitionleadsorgetthecustomertoturnitonthenightbefore.
My spell check didn't like that very much.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|