Print Page | Close Window

Prostart CT3371 Remote will not start truck

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138627
Printed Date: May 29, 2024 at 2:23 AM


Topic: Prostart CT3371 Remote will not start truck

Posted By: electricshadey
Subject: Prostart CT3371 Remote will not start truck
Date Posted: March 09, 2015 at 8:34 PM

I installed a Prostart CT3371 in my 2006 Dodge Dakota 6 speed manual transmission with a transponder bypass and when I try to start it using the remote the parking lights come on but will not start. I hooked up my multimeter to the ignition output wire and when I pressed the start button there was no voltage on the output. I used a relay to bypass the clutch during remote start with Starter output to Pin 86, 85 to ground out when running, Pin 87 NO contact to switch wire and Pin 30 to ground. Any suggestions would be appreciated. Thanks



Replies:

Posted By: kreg357
Date Posted: March 09, 2015 at 9:31 PM

Think I remember multiple Ignition wires and both (+) and (-) Accessory wires on that year Dakota.  Perhaps you could list your
main ignition harness connections.

What color factory ignition key, gray or black?



-------------
Soldering is fun!




Posted By: electricshadey
Date Posted: March 09, 2015 at 9:56 PM
I have a grey key which has a chip in it and that is why I used a transponder. I wired up 2 ignition wires and used the 5th relay from remote for 2nd ignition wire. I only used 1 + wire for the accessory.




Posted By: tedmond
Date Posted: March 09, 2015 at 10:15 PM
the 5th relay uses a selectable jumper. sometimes it comes taped to the box.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: electricshadey
Date Posted: March 09, 2015 at 10:19 PM
Yes it does and I put it in the middle for 2nd ignition wire.





Print Page | Close Window