2000 Jeep XJ keyless entry/remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138631
Printed Date: May 23, 2024 at 12:24 PM
Topic: 2000 Jeep XJ keyless entry/remote start
Posted By: smarrs
Subject: 2000 Jeep XJ keyless entry/remote start
Date Posted: March 09, 2015 at 10:59 PM
Hi all, I am new to this forum and hope that I am posting in the right place. I have purchased an Autopage C3 RS655 to put in my 2000 Jeep Cherokee Sport. It's the model with the plain remotes(no LCD remote). I am trying to get everything nailed down before it gets here. I'm good on everything but the lock/unlock. According to info found on this forum I've a negative triggered lock/unlock system. I've seen where most alarms require the use of relays. I'm trying to make sense of the install instructions, and it seems to me that they are basically saying that I don't need relays, but just hook the wires up opposite of a positive triggered system. I'm just looking for help because it seems that the systems that don't need relays have 4 outputs (2 pos and 2 neg).
I've done a ton of car audio stuff but never tackled any alarm installs. Any help would be greatly appreciated. Thanks!
Replies:
Posted By: smarrs
Date Posted: March 09, 2015 at 11:14 PM
https://www.the12volt.com/installbay/file.asp?ID=1314
Above is the link to the install manual and the info for the lock is on page 16. I just want to be sure I don't fry domething!
Posted By: smarrs
Date Posted: March 10, 2015 at 7:33 PM
Sorry, that link doesn't work. This one https://www.manualslib.com/manual/478064/Auto-Page-C3-Rs-665.html should.
|