APS 620n transmitter programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138678
Printed Date: May 04, 2024 at 12:00 AM
Topic: APS 620n transmitter programming
Posted By: ziggyb222
Subject: APS 620n transmitter programming
Date Posted: March 17, 2015 at 4:41 PM
Looking at a 06 Cobalt with a Prestige 620n remote start. Trying to program a transmitter to the brain...key one...press button three times...get a horn honk...press unlock...when I turn the key off..get another horn honk...try the remote start nothing....only function that works is the unlock....HELP!!!!! lol
Replies:
Posted By: lectricguy
Date Posted: March 17, 2015 at 6:30 PM
OK-
1.--Erase--
So you should repeat what you just did, even hit unlock. Car will honk. Hit unlock again, car will honk again then it will exit programming mode. This should erase the remote you just programmed.
Turn key to off and remove from ignition.
2.--Program--
You know the steps already. Turn key to on, press programming button 3 times, car honks once. Press LOCK. car will confirm with a honk. Next, turn the key to off and remove it. Car will honk indicating you have exited from program mode. Now all the buttons should be programmed correctly.
You almost got it correct--you need to hit lock for 1 button programming.
-------------
Lectric Guy
Posted By: ziggyb222
Date Posted: March 17, 2015 at 8:05 PM
Got it!!!!! Thanks
|