Door Locks and Door Trigger Wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138694
Printed Date: April 29, 2024 at 6:53 PM

Topic: Door Locks and Door Trigger Wiring

Posted By: cbowen
Subject: Door Locks and Door Trigger Wiring
Date Posted: March 19, 2015 at 11:00 PM

I am getting ready to install a Viper 5906v in my 2012 Jeep Patriot and I was wondering how to wire up the door triggers and door locks. For the door trigger connecions I've noticed my vehicle has 4 door trigger wires with (-) polarity. Since the alarm has one (-) polarity wire for the door trigger would I need to connect to all four wires with this connection? Then, for my door locks I have noticed that I have one wire for lock and unlock. Would I need a relay for this? If so, what kind? I have included some images of my vehicle wiring. Thanks everyone! posted_image

Replies:

Posted By: chev104275
Date Posted: March 20, 2015 at 5:27 AM

What are you using for immobilizer bypass ? I would suggest using something like an idatalink ads al ca with the DLCH5 firmware. That will give you door triggers and door locks. Where ever you buy from make sure it's flashed with the DLCH5 firmware

-------------
If i Can't Install it I Don't need it Joe

Posted By: cbowen
Date Posted: March 20, 2015 at 6:49 AM

I have the xpresskit dball2 with the chthd2 add on harness. I got it from Crutchfield and they told me they flashed it to the latest firmware. So in other words I don't need to connect the door trigger or door lock wires from my alarm? Thanks for the reply? posted_image

Posted By: tedmond
Date Posted: March 20, 2015 at 10:37 AM

the dball will handle most of your connections. You just need power, ground, d2d, ground the neutral safety, parkinglight and thats it.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: howie ll
Date Posted: March 20, 2015 at 1:42 PM

Go to Expresskit, down load the diagrams for your vehicle.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: cbowen
Date Posted: March 20, 2015 at 2:28 PM

Really appreciate all the help guys! Hopefully I will do the install this weekend and I will let u know how it goes. Thanks again posted_image

Posted By: cbowen
Date Posted: March 24, 2015 at 7:16 PM

What's up everyone. Just wanted to let you know when I installed everything my door locks and triggers are working properly. You all were right door locks and triggers work off the dball2. I have another issue though that I am going to create a different thread for. Thanks again.