avital 3100, 97 CRV
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138705
Printed Date: May 04, 2024 at 6:08 PM
Topic: avital 3100, 97 CRV
Posted By: 808gmac
Subject: avital 3100, 97 CRV
Date Posted: March 23, 2015 at 3:44 AM
Installing avital 3100 in 97 CRV only to come across able to lock with key fob unable to unlock, if ground wire will unlock, can hear module click when fob pressed but no response, also unable to find gray Molex connector in l kick panel for door triggers, and will diodes need to be installed?
Replies:
Posted By: howie ll
Date Posted: March 23, 2015 at 3:57 AM
Meter or test light* the Avital unlock wire, make sure there's an output.
GREEN/ red doors, blue/black hatch, driver floor loom or at factory alarm module driver kick panel where you might also find better lock unlock wires. Not at door entry plugs.
Best way to test, use an incandescent bulb test light such as Snap-On or Mac, locks, clip to ground, probe to suspect wire, triggers, clip to 12V+ constant, probes to wires will light up when doors are opened.
Diode together to the 3100 green wire, 1N4004 diodes, bands away from 3100.
Use the 3100 blue wire as a hood switch.
*Clip to 12V+ constant probe to unlock output.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 808gmac
Date Posted: March 23, 2015 at 10:17 AM
So wires all can be found at green alarm connector? Don't have to find gray Molex? Door trigger wires, where can I find rear glass Ajar wire, driver door and other doors all can be tied in together ,for trigger?
Posted By: howie ll
Date Posted: March 23, 2015 at 10:54 AM
I've already explained:-
GREEN/ red doors, blue/black hatch, driver floor loom or at factory alarm module driver kick panel where you might also find better lock unlock wires.
Diode together to the 3100 green wire, 1N4004 diodes, bands away from 3100.
Use the 3100 blue wire as a hood switch.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|