astrostart code 2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138712
Printed Date: April 29, 2024 at 10:38 AM
Topic: astrostart code 2
Posted By: araz2012
Subject: astrostart code 2
Date Posted: March 23, 2015 at 8:49 PM
I am getting a code (2blinks when remote start but car does not start nor any dash lights come on) any help would greatful.
Replies:
Posted By: tedmond
Date Posted: March 23, 2015 at 10:02 PM
what astrostart unit? code 2 is active brake signal.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: howie ll
Date Posted: March 24, 2015 at 2:01 AM
LED brake lights? There's a standing c. 2.5 volts on these and needs to be dioded.
Wrong (hot) side of brake switch?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: araz2012
Date Posted: March 24, 2015 at 7:39 AM
The unite is an astrostart 2205. It was working great but now it honks every time I unlock and try to remote start it Before it never did that. I pulled the unite down from dash only gives two led blinks.
|