DEI Get In and Go with Toyota Push To Start?
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138728
Printed Date: April 29, 2024 at 1:52 PM
Topic: DEI Get In and Go with Toyota Push To Start?
Posted By: ebnub
Subject: DEI Get In and Go with Toyota Push To Start?
Date Posted: March 25, 2015 at 5:41 PM
I've already figured out that with a DBALL2 my 2008 Camry shuts down when a door is opened. Looking at other DEI options the install guide for the 4x10 digital module contradicts itself and I'm wondering if anyone can tell me for sure if it will allow me to get in and drive the vehicle without it shutting down.
Link to Install Guide:
https://drive.google.com/file/d/0B82c-bcI84jlS0owVkpFd0Ryck0/view?usp=sharing
PAGE 5 has the little yellow exclamation that says "No takeover feature is available on Push-to-Start vehicles."
PAGE 40 goes on to describe how to "get in and go" with a Push To Start vehicle, the fob in the illustrations is even accurate to my own.
Link to Install Guide:
https://drive.google.com/file/d/0B82c-bcI84jlS0owVkpFd0Ryck0/view?usp=sharing
PAGE 5 has the little yellow exclamation that says "No takeover feature is available on Push-to-Start vehicles."
PAGE 40 goes on to describe how to "get in and go" with a Push To Start vehicle, the fob in the illustrations is even accurate to my own.
Replies:
Posted By: tedmond
Date Posted: March 25, 2015 at 7:27 PM
Posted By: ebnub
Date Posted: March 25, 2015 at 8:25 PM
Posted By: ziggyb222
Date Posted: March 26, 2015 at 6:55 AM
Posted By: racerjames76
Date Posted: March 26, 2015 at 7:50 AM