94 integra clifford 5706 remote start harness
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138902
Printed Date: April 28, 2024 at 8:06 PM
Topic: 94 integra clifford 5706 remote start harness
Posted By: jpbook
Subject: 94 integra clifford 5706 remote start harness
Date Posted: April 26, 2015 at 10:51 PM
Hi I'm installing a clifford 5706x on a 94 integra and I'm a little confused with the Remote start, 10pin heavy gauge harness
1. NC
2. (+) Fused 12v Accessory/Starter input
3. (+) Flex Relay input 87A key side (if req)
4. (+) Ignition 2/Flex relay output
5. (+) Fused 12V ignition 1 input
6. (+) Starter input (key side)
7. (+) starter output (car side)
8. (+) Accessory output
9. (+) Fused 12v Ignition 2/Flex relay input 87
10.(+) Ignition 1 Input/Output
On the car the Ign harness has
Constant 12V+ White Ignition Switch Harness
Starter BLACK/ White Ignition Switch Harness
Ignition BLACK / YELLOW Ignition Switch Harness
Accessory Yellow Ignition Switch Harness
What wires from the alarm harness do I not need?
how do I wire those 4 from the cars ign harness to the alarms remote start harness? Any help would be greatly appreciated thank you
Replies:
Posted By: howie ll
Date Posted: April 27, 2015 at 5:28 AM
2, 5 and 9 to the white.
Cut BLACK/ white, 6 to key side and 7 to starter motor side.
8 to yellow.
10 to BLACK / YELLOW.
Are you sure there's only one ACC?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|