Window Roll Up with 2 535t’s
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138937
Printed Date: May 17, 2024 at 5:32 PM
Topic: Window Roll Up with 2 535t’s
Posted By: cbowen
Subject: Window Roll Up with 2 535t’s
Date Posted: May 06, 2015 at 8:05 PM
I was wondering if there was a way to roll up the back and front windows separately (ex. Aux2 for front & Aux4 for back) manually and also have them all roll up when armed. When I attempt this they are all rolling up together with Aux2 & Aux4 from the alarm.
-------------
2012 Jeep Patriot, Viper 5906v, DBall2, SmartStart module
Replies:
Posted By: howie ll
Date Posted: May 07, 2015 at 2:42 AM
Try diode separating the aux wires, bands to the 5906.
I have a question WHY?
Ever heard of the KISS principal?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: May 07, 2015 at 8:11 AM
Forget my last answer. Apart from why.
Yes you can separate them as you've done but you can't have auto roll-up on arm.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|