5706v/Dball2 now factory remote doesnt flash
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138970
Printed Date: May 02, 2024 at 2:45 AM
Topic: 5706v/Dball2 now factory remote doesnt flash
Posted By: kevinthien
Subject: 5706v/Dball2 now factory remote doesnt flash
Date Posted: May 15, 2015 at 8:04 AM
hello guys, i have a 2012 toyota camry with the smart key. yesterday i took apart my car to rerun some wires for my mirror turn signals i retrofittetd into my car. as i rewired it, i noticed my car lights doesnt flash when i LOCK the car with the viper remote. but when i unlock it, it blinks the turn signals.
This morning i rechecked the wires *just by tapping them* and the lights started to work again. (blinks once when you lock, blinks twice when you unlock then the turn signal blinks)
15 mins later, i tried to lock and unlock, it doesn't blink when i lock, the turn signal only blinks when you unlock.
the strangest thing is that, when you try to lock with the factory car remote, nothing flashes. but when you unlock it does blinks.
my impression that maybe it was a loose parking light wire, but thsihppaned. please help!!!
Replies:
Posted By: howie ll
Date Posted: May 15, 2015 at 10:46 AM
Re-flash the DB-ALL
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: kevinthien
Date Posted: May 15, 2015 at 12:46 PM
Thank you for the reply howie, i truly appreciate it.
Could you tell me why or how the dball could be the source of the issue? *very interested in hearing why*
I appreciate your input
Posted By: howie ll
Date Posted: May 15, 2015 at 1:20 PM
No because I*'m not sure what you've done. You may have disturbed something or have a bad joint or the vehicle data system suspects a problem.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: kevinthien
Date Posted: May 15, 2015 at 2:19 PM
what happen was i was working on rewiring my mirror turn signals. i disconnected my car battery to make sure i didn't damage anything in the process.
i re flashed the d ball, there was no improvement.
I even tried to lock/unlock the car without the d ball, with the original toyota remote it still didnt flash when i lock. it does flash when i unlock though.
same thing with the viper alarm. its a hit or miss when you lock, and it always flashes the parking lights and turn signal when you unlock.
I do notice a delayed beeping sound when i lock. its like beep...........beep. unlocking goes beep, beep.
Posted By: kevinthien
Date Posted: May 15, 2015 at 2:23 PM
I'm really not sure why the original toyota remote has an issue with locking, doesn't beep or flash. how could that be? I'm trying to make sense why its acting this way. i know the d ball overrides the factory alarm system. but is it possible that it also over rides the flash patterns for the car when arming? is it like installing a new rom or is it like installing an app that sits on top of the rom? meaning the original rom software is still there and functional
Yet its fine when i unlock...
Posted By: kevinthien
Date Posted: May 16, 2015 at 7:28 PM
howie ll wrote:
Re-flash the DB-ALL
so i reflashed it the other day, and today i reset it. didn't do anything.
do you think maybe resetting the viper 5706v would make any difference?
Posted By: howie ll
Date Posted: May 17, 2015 at 2:24 AM
Disconnect the extra wiring if it makes no difference time to get an OBD reader.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: kevinthien
Date Posted: May 17, 2015 at 3:19 PM
hello howie, thank you for trying to help me with this. what extra wiring you speak of? i thought OBD readers only read error codes. i don't see any codes on my dash
Posted By: howie ll
Date Posted: May 17, 2015 at 4:15 PM
Only emergency codes, you may have affected load sense when you added the wiring for the mirror lights. You may need to clear via the diagnostic reader.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: kevinthien
Date Posted: May 17, 2015 at 9:24 PM
i have had mirror signals for over a year now, the reason why i went back to change up the wiring is because the way i previously wired it was cutting the wires. i ran it thru the rubber gourmet this time.
i'll try look into the diagnostic reader. thank you!
Posted By: kevinthien
Date Posted: May 19, 2015 at 11:39 AM
heres a video of what i am experiencing.
https://www.youtube.com/watch?v=64-0u3aPtf0&feature=youtu.be
Posted By: tedmond
Date Posted: May 19, 2015 at 11:31 PM
from what i see, you have a trigger fault during lock, which is why your parking light doesn't flash. It's similar to locking the door with one door open (it beeps continuously)
open/close all triggers ie door, hood, trunk pin. turn door error chirp off on in programming.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|